Technical equipment

Metal sheet and tube fiber laser cutting machine – SENFENG SF6020HM

• Laser source Raycus – 12 000 W;
• Working range (sheets) – 6000 х 2000 mm.;

Cutting capacity (thickness/mm.):

• Carbon steel – up to 50 mm
• Stainless steel – up to 50 mm
• Aluminum – up to 50 mm
• Brass – up to 20 mm
• Copper – up to 20 mm

Capacity of cutting tubes and profiles (including L and U profiles which don’t exceed the dimensons below):

• Length – up to 6000 mm
• Round tube up to ф220 mm
• Profile tube – up to 150х150 mm

CNC Fiber laser cutting machine – HARRIS GPF3015-2000

• Laser source IPG – 2000 W
• Working range – 3000 х 1500 mm

Cutting capacity (thickness/mm.):

• Stainless steel (including copper and brass) – up to 8 mm
• Aluminum – up to 5 mm
• Carbon steel – up to 16 mm

CNC Hydraulic Press Brake – DURMA AD-R 30100

• Bending power – 100 tons
• Bending lenght – 3050 mm
• Distance between centers – 2600 mm
• Daylight – 530 mm
• Stroke – 265 mm

Roll Bending Machine – WMW UBBD – 2,5 x 2000

• Maximum thickness of the detail – 2,7 mm
• Bending lenght – 2000 mm
• Minimum bending radius – 130 mm

Roll Bending Machine – VA6 – 6 x 2000

• Maximum thickness of the detail – 6 mm
• Bending lenght – 2000 mm
• Minimum bending radius – 240 mm

Roll Bending Machine – LUHTEC DBQV – 16 x 3000

• Maximum thickness of the detail – 16 mm
• Bending lenght – 3000 mm
• Minimum bending radius – 350 mm

Rotating hook shotblasting machine type “H”- STEM H 10X1

• Maximum size of the piece – h = 1200 mm diameter 940 mm
• Maximum weight of the piece – 500 kg

Single Column Press – Hydraulic WMW ZEULENRODA PYE 250 S/1M

• Pressure: 250 t
• Distance table/ram: 800 mm
• Max. ram stroke: 500 mm
• Table clamping surface:: 900×630 mm

Mig-mag and vig welding machines

• HELVI MAXIMIG 408 – 400A
• CEA CONVEX 325 PULSE – 320A
• ESAB ES 200i PRO

Drilling machine – Harris D5040

• Drilling capacity – ф 40 mm.
• Thread machining for steel/cast iron – М20/М24
• Spindel taper – МТ4
• Spindel travel – 180 mm
• Table size – 560 х 560 mm

Radial Drilling Machine – MAS VR6A

• Arm length – 2000 mm
• Drilling capacity – 63 mm
• Bore capacity – 80 mm
• Spindle taper – MK 5

Bandsaw machine – Harris BS260G

Cutting capacity:

round (diam)	square	rectangle
227 mm – 90°	220х220 mm – 90°	260х110 mm – 90°
150 mm – 45°	145х145 mm – 60°	200х125 mm – 45°
90 mm – 60°	85х85 – 60°

Universal milling machine – Harris ZX6350 ZA

• Max. drilling diameter – 50 mm
• Max. diameter for horizontal milling – 100 mm
• Max. diameter for vertical milling – 25 mm
• Table size – 1250 х 320 mm
• Table load capacity – 300 kg
• Spindle taper ISO 40

Universal lathe C10

• Faceplate – 250 mm
• Distance between faceplate to parallels – 200 mm
• Distance between faceplate to center – 1500 mm